A. Cracks in the nail polish seal layer:
Reasons and solutions: cracks usually appear within 1-2 days after the nail art with UV gel nail polish is completed. If not handled properly, the cracks will gradually increase until the sealing layer cracks and comes off in flakes. The main reason is the use of a no-wash sealer. Compared with the scrubberable sealer, the no-wash sealer has a harder and brittle texture and insufficient toughness. Cracks often appear on the surface of the nail polish with sufficient toughness. It is recommended that you use a removable seal that can be scrubbed or choose a high-quality brand of no-wash seal.

B.Reasons for easy peeling of nail UV gel polish:

Reason 1: The dead skin is not removed
You need to do a basic manicure before nails. This is the basic UV nail polish application procedure. If the dead skin is not trimmed cleanly, it may cause the nail polish to fall off easily.

Reason 2, too much primer (Base coat gel)
The primer/bonding agent should be applied as thinly as possible. If it is applied too thickly, it is easy to cause the nail polish to curl up.

Reason 3, the color gel polish is too thick
The color gel polish should not be too thick. Generally, the correct way is to use solid color twice and light translucent three times to avoid wrinkles. It is recommended to apply a thin spot for the first time, and then apply it again normally after lighting the lamp. Generally, the color will be very full. Another thing is to pay attention to the edging, and try to wrap the edging every time you make a layer.

Reason 4: too much sealing layer(Top coat gel polish) is applied
Try not to let the sealing layer flow into the nail groove. If you take too much volume and accidentally flow into the nail groove, please clean the nail groove as soon as possible.

Reason 5, the cleaning fluid is not used in enough
The more should be more, the less should be less. Don’t save it like a cleaning solution. After washing it, it will not be easy to have the sealant dry and crack, and the brightness can be better displayed.

Reason 6: mix and use different brands of nail polish
The last thing to remind is that different brands of nail polish have different ingredients. If they are used in combination, they may repel each other and cause the phenomenon of shedding. Therefore, manicurists should avoid mixing different brands of nail polish.

C. Precautions for nail UV gel polish operation:
1. The dead skin on the edge of the nail must be removed;
2. brush the balance liquid twice before applying the primer;
3. When applying primer, the amount must be small, otherwise there will be shrinkage;
4. In the same way, the amount of color glue should be small and thin, and the pure color and transparent should be applied several times;
5. the sealing layer should not be too much;
6. Do not use the non-cleaning sealant on the surface of the removable glue, because it will be easy to crack;
7. It is best not to mix nail polishes of different brands. In addition, some brands of nail polishes require the use of lamps of the same brand;
8. the gel cleaning solution for cleaning the seal layer should be sufficient;
9. Don’t press hard when brushing the nail polish glue, just brush gently with the same angle, pressure, and arc;
10. Brush the nail polish at the bottom of the nail in an arc shape

Contact Newcolorbeauty manufacturer for your UV gel polish business :

• 86 136 6298 7261
• info@newcolorbeauty.com