The packaging of nail polish gel is similar to traditional nail gel polish, and it is directly operated with its own brush. However, because the nail polish can be cured by light, the outside of the nail uv polish bottle must be painted to prevent light transmission.

It is non-toxic, odorless and environmentally friendly. It has the gloss of gel and the color of oil. Nail gel polish is a symbol of the latest nail art trend. Compared with ordinary nail polishes, such as nail polish brand newcolorbeauty nail gel polish https://www.newcolorbeauty.com/macaron-color-gel-polish-collection-product/, its raw materials are taken from Based on natural resin, it is environmentally friendly, non-toxic, healthy and safe. It is compatible with glue and nail polish. The color is full and clear, easy to apply, instant dry, and gloss is maintained longer. It is known as the most fashionable nail polish Star masterpiece.

There are usually three ways to remove nail gel polish:

1. Unloading method with tin foil;

2. Direct removal method;

3. The method of easy-to-use tin foil removal and the removal method of armor removal package are more commonly used. Compared with the direct removal method, the damage to nails is less.

The correct operation steps of the tin foil removal method are:
1. Prepare cotton pads, nail polish remover, tin foil, steel pushers, sand bars, cotton sand bars, and nutrient oil. These tools and products. Unload.

2. Use sand strips to polish the nail polish glue on the surface of the nails, and then pour the nail polish remover on the cotton sheet to completely cover the surface of the nail.

3. Take an appropriate amount of tin foil and wrap the cotton sheet on the nail, and pay attention to the seal.

4. Wait for about 20 minutes until there is a slight burning sensation on the nail surface, then peel off the tin foil and remove the cotton sheet.

5. At this time, you will find that the nail polish on the surface of the nail has been melted. Use a steel pusher to gently remove the sticky nail gel polish on the surface.

6. Polish the nails with a cotton sand strip, and then apply a layer of nutrient oil.

First of all, use a square sponge sand strip to rub off the top coat of the phototherapy. This action is to allow the nail remover to penetrate better at that time. While rubbing, you must also pay attention to the action not to be too large to avoid injury To your real nails.

Next, prepare 100% pure acetone (Acetone) delustering water, soak the sponge ball, place it on the surface of the nail, and wrap the ten fingers with aluminum foil and let it stand for 15 minutes.

After 15 minutes, the phototherapy on the nails should automatically “lift up”. If not, you can soak the sponge ball again, repeat the previous step, and let it stand for another five minutes. The remaining phototherapy on the surface can be pushed away with a beech stick or rubbed gently with a sponge sand stick again.

Because pure acetone delustering water is more irritating, the nails will be particularly fragile and dry at this time, so it is particularly important to supplement the finger edge nourishing oil, because the finger edge oil can make the nail polish harder and stronger, and you can wipe it more often if you have nothing to do!