What is UV nail Gel polish ? What should pay attention to when using nail polish glue?

What is nail polish? Nail gel polish is a popular nail product in recent years. Compared with other nail polishes, it has the characteristics of environmental protection, non-toxicity, health and safety, and has the common advantages of glue and oil.

The classification of nail polish is roughly as follows:

• Solid color nail polish: like ordinary nail polish, it has many color options
• Glitter Nail Gel: Nail Gel with Glitter Sequins
• Fluorescent nail polish: it will be very charming and bright under ultraviolet light
• Noctilucent nail polish: it will store light and glow at night, similar to glow sticks
• Snake Nail Polish: Also known as Bubble Nail Polish, the effect of applying it is like the texture on the snake.
• Cat eyes nail polish: like a cat’s eyes, it will change with the light, as charming as an opal
• Temperature change nail polish: as the temperature changes, the color of the nail polish will also change

When doing nail polish manicure, pay attention to the following ten things:

1. The dead skin on the edge of the nail must be cleaned;

2. Brush the balance solution twice before applying the primer;

3. When applying primer, the amount must be small, otherwise there will be shrinkage;

4. Similarly, the amount of color glue should be small and thin, and the solid color and transparent ones should be painted several times;

5. The sealing layer should not be too much;

6. Do not use the disposable sealant on the surface of the removable adhesive, because it will be easy to crack;

7. It is best not to mix nail polishes of different brands together. In addition, some brands of nail polishes also require the use of lamps of the same brand;

8. The gel cleaning solution for cleaning the sealing layer should be sufficient;

9. When brushing nail polish glue, do not press hard, just brush gently at the same angle, pressure and arc;

10. Brush the nail polish glue on the bottom of the nail in an arc shape.

Common problems and reasons for the use of nail polish glue:

Causes of warping:

1. Due to the incomplete cleaning of the real nails, the grease film on the nail surface is not cleaned, the dead skin is not completely trimmed, or the continuous friction of the nail surface after the nail polish is applied can easily cause warping.

2. Different brands of nail polish glue are used together. When making nail polish UV gel, the editor recommends that the same brand be used from the primer to the sealing layer, so as to avoid the adverse consequences caused by the mixed use of different brands, such as warping and so on.

3. The dry adhesive used to make crystal armor is used. Some manicurists use the dry adhesive for crystal nails in order to keep the nail polish on the nail surface for a longer time. The result is counterproductive, and the nail polish peels off faster.

Reason for stratification:

1. The sealant of the same brand product is not used;

2. No scrubbing removable seal is used;

3. The front edge of the nail is not sealed in place, leaving small gaps that cause air to enter;

4. After the color gel is illuminated, scrub with a cleaning solution, and then apply the sealing layer. The color glue does not need to be scrubbed after lighting, and the direct coating of the sealing layer will avoid delamination;

5. The color glue layer is too thick and the sealing layer is too thick.

Reason for discoloration:

1. If the top coat gel is too thick, it is advisable to apply the top coat gel once. If it is applied more than twice, the color will be cast;

2. The lighting time of the sealing layer is too long, and the lighting time of the sealing layer should not exceed 2 minutes. If the lighting time is too long, the phenomenon of yellowing will appear.